The OSD control panel lets you adjust the volume, screen brightness, contrast, sharpness, color temperature of the display and more.

To open the OSD control panel swipe down with 2 fingers at the lower right corner of the touch screen.

Other settings are shown on below diagram:

Function keys on the keyboard works only when a device is connected via USB-C input or bluetooth and when NexDock is not working in tablet mode.

To use the function keys hold down Fn key and press the Function key at the same time.

Below you can find the description of all the function keys:

Touchpad sensitivity, gestures and settings are determined by the device connected to NexDock.

As suggestions:

– Please check DeX settings to make changes on touchpad settings
– Some of our customers are using apps such as Key Mapper to disable gestures.
– Optionally, sticking a trackpad protection onto touchpad might provide better touchpad sensitivity.
– If a mouse is connected, touchpad can also be disabled anytime pressing Fn+Esc key.

Each USB-C port on NexDock has a specific purpose and cannot be used interchangeably.

1.) USB-C port on the left side works with smartphones.  Other devices you can use with this USB-C input port are;

• USB-C Windows Laptops,  Tablets,  Chromebooks
• USB-C Macbooks, iPad Pro
• Steam Deck, USB-C Gaming Handheld devices, Nintendo Switch

We provide USB-IF Certified (e-Marker) Gen2 USB C 3.1 Cable that supports 10Gbps data 4K Video and 100W power delivery with NexDock. You can use any other USB-C cable with similar specs.

2.) USB-C charging port on  close to the display works only with PD chargers.

To charge NexDock we provide USB-C PD Charger with  45W output power delivery and you can use any other charger with similar specs.

If you cannot connect your smartphone to NexDock, make sure your smartphone is connected to the correct USB-C input port. NexDock works only if your phone supports video output over USB-C port.  

Please check if your smartphone is supported here

To charge NexDock we provide USB-C PD Charger with upto 45W output power delivery and you can use any other charger with similar specs.

If a device is connected to NexDock you can check the battery charge level at anytime by pressing function key and battery icon on the keyboard or opening OSD control on the touchscreen

If no device is connected, NexDock goes to sleep mode in 300 seconds.

Please note that the new battery is only able to achieve best performance after two or three full charge and discharge cycles.